Extron MLS 608 D MA 40 Watt 70 Volt Mono Power Amplifier

Extron MLS 608 D MA 40 Watt 70 Volt Mono Power Amplifier This is a refurbished item that comes with a 90-day exchange warranty. This has been serviced and calibrated to work as new. Servicing can include replacement of print heads, gears, rollers, cleaning and re-lubricating all internal mechanisms. Porter Electronics prides itself on only acquiring top quality used products that show minimal signs of use. Buying from Porter Electronics you should expect a very nice, refurbished unit. We do offer an extended warranty that can be purchased during checkout and will apply at the end of our already 90-day warranty.

Porter Electronics also offers free tech support for those needing extra help. We offer a free digital download of the manual for this product below. If you are unable to locate the link, just use our Contact Us page to request one.

Product Details  - The Extron MLS 608 D Series switchers are simple-to-use, eight input, multi-format switchers designed to integrate digital and analog sources. All signals are transmitted over CATx cable to the included MTP/HDMI U R Twisted Pair Receiver. The MLS 608 D Series features Extron ProDSP™ digital audio processing, which provides an extensive array of easy-to-use tools for audio system setup and fine-tuning. The MLS 608 D Series offers digital video switching with four HDCP-compliant, HDMI inputs, and analog video switching with four universal inputs, including an Extron Universal MTP Twisted Pair input. It outputs HDMI twisted pair signals and analog MTP Twisted Pair to the included receiver, providing a complete digital and analog video and audio switching system.

The MLS 608 SA offers stereo power amplification with 20 watts per channel into 4 or 8 ohms. While the MLS 608 D MA features mono 70 volt amplification with 40 watts output. Both the MLS 608 SA and the MLS 608 MA feature an Extron exclusive, highly efficient, advanced Class D amplifier design with patented CDRS™ - Class D Ripple Suppression technology that provides a smooth, clean audio waveform and an improvement in signal fidelity over conventional Class D amplifier designs.

• Multi-input switcher for digital and analog video signals
• Inputs: Three 15-pin HD connectors - one with loop-through for RGBHV, HDTV component video, and S-video or composite video; one Universal MTP Twisted Pair input, four HDMI connectors; seven captive screw connectors for balanced or unbalanced stereo audio; one balanced or unbalanced mono audio input via MTP
• Outputs - on MTP/HDMI U R receiver: RGB on 15-pin HD, component video on BNCs, S-video on 4-pin mini DIN, composite video on BNC, HDMI connector, captive screw connector for communications, and three captive screw connectors for balanced or unbalanced audio - two on MLS 608 D switchers and one on MTP/HDMI U R
• ProDSP™ 32/64-bit floating point signal processing — The MLS 608 D switchers feature 32/64-bit floating point audio DSP processing, which maintains very wide dynamic range and audio signal transparency, to simplify management of gain staging while reducing the possibility of DSP signal clipping.
• Transmits HDMI and analog video, plus audio and RS-232 over CATx cables
• Includes MTP/HDMI U R Twisted Pair Receiver — Automatically routes incoming signals to the appropriate output connectors.
• HDCP compliant — The MLS 608 D switchers and included MTP/HDMI U R fully support switching and long distance transmission of HDCP signals.
• EDID Minder® automatically manages EDID communication between connected devices — EDID Minder ensures that all sources power up properly and reliably output content for display.
• HDMI audio de-embedding — Strips two-channel PCM audio off HDMI inputs, allowing for DSP processing and signal routing.
• HDCP Visual Confirmation provides a green signal when encrypted content is sent to a non-compliant display — A full-screen green signal is sent when HDCP-encrypted content is transmitted to a non-HDCP compliant display, providing immediate visual confirmation that protected content cannot be viewed on the display.
• Cable equalization for each HDMI input — Actively conditions incoming HDMI signals to compensate for signal loss when using long HDMI cables, low quality HDMI cables, or source devices with poor HDMI signal output.
• Sends 720p, 1080i, and XGA (1024x768) HDMI signals over 200 feet (60 meters), 1080p/60 and 1920x1200 HDMI signals over 100 feet (30 meters) with standard CAT 5e cable — Extron STP201 Digital Twisted Pair cable provides added protection from outside interference and increases overall signal transmission distance, allowing 1080p/60 and 1920x1200 signals to be sent 50% further than with standard CAT 5e cable.
• Four input analog universal video switching — Four universal inputs, including an Extron Universal MTP Twisted Pair, accept RGBHV, HDTV component video, and S-video or composite video sources. The output is Universal MTP Twisted Pair to the included MTP/HDMI U R.
• Controllable via TouchLink® Control System, MediaLink® Controller, front panel buttons, or RS-232 — The switchers can be controlled using the front panel backlit buttons or RS-232. An optional TouchLink Touchpanel Control System or MediaLink Controller may be connected to the RS-232 port to provide a simple and intuitive user interface for the MLS Switchers, and the entire room.
• Skew equalization for MTP input and output — Skew adjustments are stored in memory for both the MTP input and output, maintaining RGB color alignment at all times.
• Separate variable level and peaking controls for analog MTP signals
• Front panel control with backlit buttons — The buttons can be custom-labeled for easy identification. Because the buttons illuminate, they are helpful for presenters in low-light environments.
• Audio switching and output volume control — The MLS 608 D Series features audio switching for seven stereo balanced or unbalanced input sources, and provides master volume control and muting. Three balanced or unbalanced outputs are available, two on the MLS 608 D switchers, and a third on the MTP/HDMI U R. Each output can be set as variable or fixed.
• Audio input gain and attenuation — Gain or attenuation can be adjusted for each input to eliminate noticeable differences when switching between sources.
• Two mic/line level inputs with 48 volt phantom power — The MLS 608 D is equipped with two mic/line level inputs. Selectable 48 volt phantom power allows the use of condenser microphones.
• Available with integrated stereo or mono 70 volt power amplifier — The MLS 608 D SA offers stereo power amplifier with 20 watts rms output per channel into 4 or 8 ohms while the MLS 608 D MA offers a mono 70 volt power amplifier with 40 watts rms output. Both feature an Extron exclusive, highly efficient, advanced Class D amplifier design with CDRS™ - Class D Ripple Suppression, an Extron patented technology that provides a smooth, clean audio waveform and an improvement in signal fidelity over conventional Class D amplifier designs. CDRS eliminates the high frequency switching ripple characteristic of Class D amplifiers, a source of RF emissions which can interfere with sensitive AV equipment such as wireless microphones.
• DSP Configurator™ Software — A powerful yet user-friendly PC-based software tool for managing all audio and video operations of the MLS 608 D. It enables complete setup and configuration of digital audio processing tools on the ProDSP platform, as well as switching and mixing.
• Front panel USB configuration port — Provides convenient access for system setup and configuration, as well as ProDSP for audio system integration.
• MTP/HDMI U R receiver plenum rated - meets UL 2043 for heat and smoke release, excluding power supply
• Power Save Mode — The MLS 608 D can be placed in standby to conserve energy when not in use. When power save mode is enabled, the switcher draws less than four watts of power, reducing cost. The power indicator LED turns amber to indicate that the switcher is in the power-save standby state.